- Best HVLP Spray Gun – ( Editor’s Choice )
- HVLP Spray Gun
- Benefits of HVLP
- Drawbacks of HVLP
- Types of Paint
- Features to Look For
- “How to” Tips
- Wrap Up
The time has finally come, and you have decided to change the place where you live?! We know how excited you must be, especially if you have chosen to do the renovation yourself. Well, we have great news for you – the process of painting will be the least of your worries! The only thing you need is the best HVLP spray gun.
The list of advantages a high volume low-pressure paint sprayer has to offer is long. You will save time, and your work might even seem like fun. An HVLP spray gun is the perfect replacement of the old brushes and rollers. The only difference is the fact that you do everything much faster.
However, finding a reliable product is not an easy task to undertake, so make sure that you read our HVLP spray gun reviews that will surely help you with that! Let’s get started!
Best HVLP Spray Gun – ( Editor’s Choice )
Finding the most suitable product is essential. Therefore our team has created this buying guide and the following reviews. Remember that they are not arranged in any particular order and you will have to decide for yourself which one is the most reliable.
1. HomeRight C800971
This electric spray gun is fantastic at painting any furniture you need. It is light in hand, even though it has decent power – 450 watts. The unit has multiple spraying settings to choose from. Plus, it doesn’t require as much thinning compared to other hand-held models. You can use paints such as chalk type, milk, latex, polyurethane, varnish, and others. Just pop the right spray tip, and you are ready!
It isn’t typical for an HVLP sprayer to be able to work on exterior projects such as fences, decks, and walls, but you can do that with this spray gun! While you use it, you also save time for refilling as often, thanks to the 39-ounce container this item has equipped. For better results hold the gun at a distance of 10-12 inches from the surface, you will paint and perpendicularly to it.
- You can clean it swiftly.
- Easy and quick to set up.
- You can spray different materials thanks to the three interchangeable brass spray tips that come with the item.
- You don’t need to thin the paint as much since it can handle thicker ones.
- If you use oil-based material, the color of the different tips can come off.
- It’s prone to over spraying, be careful how you control it.
2. Campbell Hausfeld Paint Sprayer Gun
Because of the design of the sprayer, you are capable of adjusting all that you need for optimal atomization and the size of the particles. So except for the adjustable fluid and pattern control, you also have an 80-mesh inline filter inside that will take care of any dirt particles, debris or big patches of paint. This way you get a high-quality finish.
This item is suitable for automotive, carpentry and other projects. You have included a ¼ inch male NPS air inlet together with the gun. You do need an air compressor to use it. Keep in mind that this whole package also meets every current environmental regulation there is for spray equipment.
- There are flow and shape regulators that let you adjust the pattern of spraying from circular to oval.
- The needle is stainless steel, and it has a polished aluminum body that prevents corrosion.
- Easy to clean thanks to its construction.
- Its 600Ml acetyl cup is resistant to chemicals, and you can see the level of material inside.
- It can’t handle well thicker paints.
- The body is fragile.
- The gun’s edges are sharp and rough so be careful.
3. TCP Global Professional HVLP Gun
With this HVLP Gun in the set, you get three different nozzles from 1.0 to 1.88 size, two 1L aluminum cups, another smaller one that is stainless steel, a pressure regulator, an inline mini moisture filter and a cleaning kit with additional items, plus a manual with directions. That is a big set as you can tell, but let’s take a look at all the different types and what does each one do.
The 1.8mm is magnificent for primers, oil-based paint and others that are from medium to heavy viscosity coatings. The 1.4mm is ideal for base, clear coats and others that are from light to medium viscosity. The last one is when you need to touch up just a little bit, or if you are some narrow, small areas to work on.
- You can diffuse a variety of different paints with this gun, use one of the three spray tips you get.
- The needle and nozzles are stainless steel making them resistant to corrosion and easy to clean.
- Thanks to the multiple airflow holes at the head of the gun, you get great atomization and consistent pattern of spraying.
- The grip can cause fatigue after some time of using it.
- The gun’s finish can come off when you use acetone when cleaning them.
4. Fuji Gravity HVLP Spray
This is a spray gun for someone who enjoys doing DIYs and wants professional results. You can use it on different furniture pieces, such as doors, fences, shutters, cabinets and so on. You can be precise when spraying here, because of the fan pattern control. You can apply the paint vertically, horizontally or with circular motions, and on top of that, you can adjust from 12” oval pattern to just about 1” circular.
Helping the hand fatigue, the holder has an ergonomic design. Also, don’t be afraid to use waterborne or solvent-based coatings, the needle has features to combat with it wearing off. Note that the spray gun is powered by a 1400 watt 2-stage bypass motor, which has a metal turbine case around it.
- You can adjust the pattern of spraying, from small circular to full, thanks to its options.
- To reduce overspray, you have an air control valve inside the 25ft hose.
- Easy clean-up, because of how it disassembles.
- You can use different materials thanks to the included air caps for a variety of sizes.
- The needle tip has stainless steel fluid passages, which prevents it from wearing.
- You need time getting used to the proper techniques for using this system.
- The hose is explicitly made for the cup gun, and you can’t switch it with other parts.
5. REXBETI Ultimate HVLP Sprayer
Painting furniture has never been more comfortable and fun! This electric gun allows you to spray precisely crafts, doors and other furniture with a smooth finish. You can rotate the spray tip and thus use a different flow rate of paint. It is also ergonomic so you can do your projects from start to finish without worrying about hand fatigue.
The 550 watts of power inside the sprayer you also get a variety of nozzles. The 2.0 and 2.5mm tips are fantastic for thinner paints such as sealers or varnish. The other one you are also provided with is 3.0mm; this one is great for colors such as latex, chalk and milk type.
- It can be connected to three different spray patterns.
- You get three distinctive sizes of nozzles, for thin to thicker paint.
- There’s a flow control know you can use to regulate the spraying.
- You can move anywhere thanks to the 6.6 ft power cord.
- Easy to clean after spraying thanks to its detachable design.
- You have to be mindful how you manage it because it is prone to overspray and not producing a precise spray pattern.
- The tank is pretty small and needs to be refilled often, depending on your project.
6. TECCPO HVLP Spray Gun
With the 1300ML cup and the long power cord, you can work on more significant DIY projects, covering a larger area of spraying and walking freely. The smaller two tips you get in the set are appropriate for thin paints, while the bigger one is for latex or milk type paint. You also have a feature that helps you paint slowly in narrow spaces and powerfully in larger areas.
Merely keep in mind that you can use this TECCPO HVLP spray gun on corners and interior surfaces or furniture. The unit itself is light and handy, helping you with exhaustion during a long time of work. Note that you should always clean your sprayer after using it, for this one you have a brush. Together with the detachable design, this task becomes much more fun to do and saves up your time.
- The durable copper nozzle comes in three different sizes.
- Sturdy and enduring metal valve core.
- It is straightforward to assemble and disassemble this way making it easier to clean as well.
- The flow control knob is used for regulating the paint output.
- You can use it on larger projects and spaces, because of its 6.56ft power cord.
- The tip is prone to clog, and you lack a feature to combat with this.
- The instructions aren’t detailed, leaving you to figure things out.
7. JZBRAIN Electric Sprayer
The JZBRAIN Electric Sprayer is excellent for home use, on car parts, furniture or other home appliances. Кeep in mind that it is not suitable for spraying ceilings or any other surface where you need more significant than a 45-degree angle to work. Of course, you are also able to produce three different spray patterns: vertical, horizontal and round. Before starting the job, try which one is the most suitable for that particular task.
Before painting, use the viscosity measuring cup to see which of the three brass nozzles you should use. The flow rate with the biggest tip – 2.5mm is 830ml per minute. Also don’t be worried about creating much noise, because the turbines have noise reduction. Also, do not create an uneven finish, all you have to do is always leave some material inside the container. If the suction tube doesn’t go in the paint, air bubbles will break the flow of the spraying.
- Extended motor life thanks to a sponge filter, which prevents dust from getting inside.
- You can adjust the flow rate easily with a paint volume regulator on the trigger.
- There is a waterproof power switch, instead of unplugging from the socket.
- Easy to clean by disassembling it fully.
- The charger isn’t well built, the holes are too close to each other, and it’s hard to keep things down.
HVLP Spray Gun
If you need to paint fences, decks, crafts, dressers or any other type of furniture; you should get yourself an HLVP spray gun or a paint sprayer for cabinets out there. First, let’s look at what the HLVP stand for, it is an abbreviation of High Volume Low Pressure. They are amazing at DIY painting and go up to higher performance systems.
Benefits of HVLP
- Less overspray – As the name suggests, this type of sprayer has less pressure, except for that there’s also more air here. This creates less waste in overspray and more paint reaching the surface. The smaller overspray makes the unit suitable for the environment because it’s producing less pollution.
- Health – Since it lets less material go in the air, this makes the air where you’re working, at least compared to other types of sprayers, way healthier for you. Less chemical particles in the air, more fresh air. However, you should always use breathing equipment.
- Money & Time– Naturally overspray plays a part here as well. HVLP cuts down the cost of paint, because of the less overspray it produces and the improved transfer efficiency it has nowadays. The effectiveness is also connected to the time you need for doing the work, and it’s obvious that when something is more active, it also reduces time. The value, however, can be seen if you are a professional painter, but even if you’re not, it is still visible, and indeed, any reduction is welcomed.
- Price – Once again we are talking about money, but this is a bit different. Because HVLP spray guns are usually smaller and are used on smaller projects, they aren’t that expensive. If you are someone who occasionally or often find themselves painting your fence or vehicle, you will see that in a short amount of time the sprayer will play itself out.
Drawbacks of HVLP
- Usually, they aren’t suitable for exterior projects such as fences, sheds, and decks; they limit you only to use them on interior jobs.
- It isn’t good with thicker paints unless designed so.
- The turbines of HVLP Spray gun can heat up too much, that can cause evaporation of products, such as diluents, which help produce the varnish of a surface. This can create a known effect called “orange skin” during the drying process. You can, however, solve this by adding more of the diluent, this will balance the otherwise loss caused by the heat.
Types of Paint
So we keep saying that the nozzle you use depends on the paint you need for your project, but let’s dive into what are the various types of color so we can be more clear.
Water-based – They are easier to use, compared to other types such as the oil-based. Naturally, they dry and cure faster because they are thinner and even when you clean up you don’t have to use harsh materials to get thing spotless. They are more popular, because of everything that we just said, however, they are as resilient as the oil paint, and they shouldn’t be used on surfaces that require a lot of abuse. Nevertheless, they are great for walls and ceilings.
Oil-based – It is best to use them on a surface that can tolerate a lot of abuse. They need time to dry and cure, however once settled they conserve and protect better and are more durable than the different water-based coats. Their finish is smooth and gives a natural gloss to the surface underneath. For oil-based coatings usually, the active ingredient in use is linseed oil or alkyd.
- Primers – Primers aren’t certain paints, and they aren’t appropriate for top coating, but they help paint attach better to a surface. It is best to use them as a base coat for your color, this will make a new durable layer. Note that you don’t always need a primer, but they are great for situations where you are working on a fresh surface, or you need to change the color.
- Finishes – A finish is how a thoroughly dried paint looks like, it can be glossy, semi-glossy or matte, which is referred to a not glossy finish. The top that can cope with abuse and cleaning the best is the gloss paint. That’s why they are most suitable for rooms like bathrooms and kitchens. The only bad thing about a glossy finish is that it is better at reflecting light, this can bring more illumination in a room, but it can also highlight any flaw on a surface.
- Matte – Because they don’t produce glossy finish usually they are used on areas you want to hide, such as the ceiling. Overall they are easier to work with, but they are also easily marked up, compared to other paints. When it comes to non-glossy finishes, they are two types, matter, and matter enamel, the later one is more durable and is appropriate for high traffic areas in your home.
- Satin and Eggshell – These two are in a category separate from the others because they are somewhere between non-glossy and semi-glossy materials. They have just a little bit of gloss, which makes them more durable. You can use them somewhere where you need this durability, but don’t want the glossy effect of the other paints.
- Semi-gloss – Logically this type of finish provides even more durability, because of that they are often used on trim pieces. They are easy to clean and can delay scuffing. Usually, they attach easily to any surface and need only one layer of coating.
- Gloss – This is one of the most used types of paint for the interior. They can be used on almost any wall, but they are also used on wood surfaces, because of their sheen effect. To get that smooth finish though, you need more than one coat. You will also need to wait for each layer to dry longer, since that’s how they work, while the non-gloss paint dries much faster.
Features to Look For
It can be complicated and intimidating to know how to choose a spray gun of any kind. However, we as PaintSprayerPro editors, can help you by sharing our other articles on all sorts of paint sprayers that are available. With our crew, you will find loads of information. However, let’s first look at what you should consider when you are selecting a well-manufactured paint spray gun.
- Quality – A lot of people make a mistake to choose a regular spray gun for high-viscosity coats such as enamels and ceramics. However, this isn’t appropriate, and you should at least consider getting the best airless paint sprayer if you are going to use such heavy finishes during a high production run.
With other types of coats, you should consider what your goal is? This will influence your decision because an HVLP gun has high transfer efficiency, but a conventional spray gun can provide you with higher atomization rate. At the same time HVLP, LVMP or the traditional type can produce an automotive-quality finish.
- Cost – For some performance is a bigger priority, but for others, the price may be rated higher. An example of value is that a conventional sprayer can use up to twice the amount of paint of the HVLP model. So it all comes down to what color you are going to use because the HVLP might not be able to work with it as well. We recommend you research this and decide what’s more appropriate for you.
- Feed types – You should know that there are gravity and suction feed. The first one is common with people who work with metal equipment, like a car painter. This kind has a cup on top of the gun and gravity pulls the paint down to the mechanism for spraying. Because this path is relatively short, this makes the sprayer easier to clean and also extends its life.
The suction kind has a connection tube to go into the paint cup. The paint is sucked through the tunnel and pushed out thanks to the air pressure from the gun itself. This is demanding more energy.
If you spray over a gallon of paint at one time, you should look for a pressure pot, because it offers a higher coating volume. Plus you can control the pressure as long as it has that feature, this will make it easier for you to reach your production goals. Meanwhile, a continuous feed is offered by fluid transfer and diaphragm pumps. If you are looking at a siphon and/or gravity-fed spray guns, keep in mind they work great with low-viscosity paints.
- Price – Consider the fact that you can’t fully rebuild or repair a lower cost paint sprayer and it doesn’t have as many options or flexibility when it comes to flow control, setup options and so on.
When you have a limited budget, you should research a lot to find the most versatile option on the market that you can afford. There’s a lot about spray guns and the stuff you need to know about them, but with our help, you will be able to make an informed decision. After all, finding and buying the best and right tool for you and the job is the most important task!
“How to” Tips
To produce a fantastic paint job, you first need to learn the technique and understand how to use an HVLP spray-Gun. We will go through the steps, so you have a basic understanding of that, then you can test them out and alter them in a way more beneficial to you and your specific paint project.
Step 1. Just in case of overspray or accidental pulling of the trigger in the wrong direction, we recommend you prepare everything that you don’t want to spray. Use masking tape and folio or other materials to protect all of these items.
Step 2. To get the HVLP Spray gun to start you need to switch on the air compressor, which powers the whole system. Usually, you would set the air pressure to around 90 psi, but we recommend you look at what the spray gun manufacturer says for the one you have. A feature most of the sprayers have is a pressure regulator, most of the time you will need to bring down that 90psi to around 50, but you can alter it as you go.
Step 3. So you’ve turned on the compressor, now you need to attach the spray gun to its hose. After that press, the trigger of your unit and hold it until the fluctuation at its base end. Now is the time when you can put your chosen paint into the canister. You might have a chart from the manufacturer which will help you determine how much you will need for the spraying. Once done that, hook the canister to the gun.
However, before you start spraying on the surface you’ve chosen, we recommend you spray another piece of for instance plywood. You will probably need to adjust the gun so you can get your wanted spray pattern. Usually, it’s determined if you will work on a narrow or larger area, but it can vary. Plus you can now test all types, so you know what will work best for this moment. Speed up the fan if the paint is running and if the mist is too subtle.
Step 4. After you’ve adjusted the fan, you will need to play with the fluid control. The perfect mist is one that’s heavy enough to be stable but without any excess. This will come with practice so don’t get discouraged. Hold the gun around 7 inches from the surface you will paint. The important thing is that it should be perpendicular to the surface.
Step 5. Move the HVLP gun horizontally, don’t focus on just one area for more than a few seconds, because the paint will start to run down. To minimize that, you should start from the top and make your way down slowly. Start your sweep before you reach the surface and as you come to it apply the trigger. At the end release the trigger, but make sure you continue the sweep for a few more inches, this will create a tremendous smooth effect.
Well done, you guys! As this is the end of our buying guide, you are now experts in finding and using the best HVLP spray gun. We really hope that you have noticed our article useful and you won’t forget to share it with your friends and family.
As people say, the details make the difference between good and great, and an HVLP sprayer is perfect for smaller projects and touch-up work. Our HVLP spray gun reviews will definitely confirm that, and we hope that you have found the product you were looking for! If you want to share your opinion with us, do not hesitate to send us an email or leave us a comment.
Our team loves helping our readers, so we have many other buying guides that you will surely find useful. Make sure you check them out as well! Thanks for reading, and as always- stay put!